TrayNeo
3D workspace ↓
B02 / Solve for

B02 · Notch solver · any two measurements

Notch solver · any two measurements: solve the missing measurement, check the equations and inspect the applied geometry with numeric 3D dimensions.

Beta · Measurement solver

Plan your rise

Edit dimensions ↑
L1 · 350 mmL2 · 350 mmStraight stock: 700 mm · W 200 mm · H 100 mm

Drag to rotate · pinch or scroll to zoom

Inspect the solved angle and formed geometry.

Measurement and model references

L1 · 350 mmL2 · 350 mmStraight stock: 700 mm · W 200 mm · H 100 mm

For the angle and notch solvers, unmeasured straight legs are visualization extensions, not calculated stock requirements. Only the displayed measurement results are solved from your inputs.

Ideal geometric solver. Excludes kerf, bend radius, material allowance and connection specifications. Reference-product modes remain separately under review.

B02 · Notch solver · any two measurements

L1 · 350 mmL2 · 350 mmStraight stock: 700 mm · W 200 mm · H 100 mm
Side height / base width100 mm
Bend angle45°
Solved section dimension100 mm
Solved angle45°
Full V opening82.84 mm
Half V opening41.42 mm

Ideal geometric solver. Excludes kerf, bend radius, material allowance and connection specifications. Reference-product modes remain separately under review.

Choose any two measurements

Choose the unknown: full V opening, bend angle or section dimension. Enter the other two. Choose vertical for a V in the side walls, where the section dimension is wall height; choose horizontal for a V across the base, where it is tray width.

Equations

Full opening K = 2D × tan(θ / 2). Angle θ = 2 × atan(K / (2D)). Section dimension D = K / (2 × tan(θ / 2)). The half opening is K / 2. Angles are degrees; the supported range is 5–90°.

Reference numerical example

With D = 250 mm and θ = 25°, the full opening is 110.85 mm and the half opening is 55.42 mm. All three solving modes reproduce the same ideal geometry.

Model references

For the angle and notch solvers, unmeasured straight legs are visualization extensions, not calculated stock requirements. Only the displayed measurement results are solved from your inputs.

Scope

Ideal geometric solver. Excludes kerf, bend radius, material allowance and connection specifications. Reference-product modes remain separately under review.

All numbered methods ↗